Beam Remote Codes & Beam Universal Remote Programming Guide

To sync your Beam remote control with various devices like your TV, Soundbar, or DVD player, you need to get the right Beam remote codes.

With the right codes, you can have seamless synchronization and optimal use of your 6-in-1 Beam remote control.

This guide will provide you with a comprehensive list of Beam universal remote codes and step-by-step instructions for programming your remote to your devices.

Understanding Beam Remote Control

The Beam remote control is not just a universal remote; it’s a versatile, smart solution for your home entertainment system.

It’s capable of syncing with a wide range of devices, including your TV, Soundbar, DVD player, Blu-ray, TV, and more.

Additionally, the Beam remote can program other remotes that are IR-powered remote controls, making it a handy tool for managing multiple devices.

To program your Beam remote, you’ll need the specific universal remote codes for your device. Here’s a comprehensive list to help you find the right one.

Beam Universal Remote General Codes

• 0002
• 0086
• 0004
• 0009
• 0008
• 0091
• 0133
• 1181
• 3099

Beam Universal Remote Codes for AOC TV

• 2091
• 2063
• 4050
• 4069

Beam Universal Remote Codes for Apex TV

• 2497
• 2499
• 2424
• 2431
• 1796

Beam Universal Remote Codes for Citizen TV

• 0004
• 0008
• 0009
• 0061
• 0042

Beam Universal Remote Codes for Changhong TV

• 2431

Beam Universal Remote Codes for Coby TV

• 1796
• 2356
• 1804
• 1863
• 2448

Beam Universal Remote Codes for Cutis Mathaes TV

• 0105
• 3022
• 2465
• 1847
• 0004

Beam Universal Remote Codes for Daewoo TV

• 3023
• 0004
• 0126
• 0014
• 0127

Beam Universal Remote Codes for Daytron TV

• 0004
• 0009

Beam Universal Remote Codes for Durabrand TV

• 0135
• 0198
• 0157
• 0217
• 0189

Beam Universal Remote Codes for Dynex TV

• 1171
• 2461
• 2351
• 0135

Beam Universal Remote Codes for Element TV

• 3538
• 1025
• 2468
• 1820

Beam Universal Remote Codes for Emerson TV

• 2324
• 3110
• 2454
• 2455
• 2442

Beam Universal Remote Codes for Envision TV

• 2504
• 2095
• 0004
• 0074
• 0009

Beam Universal Remote Codes for Funai TV

• 1877
• 0198
• 1949
• 0051
• 0042

Beam Universal Remote Codes for Gateway TV

• 2116
• 0046

Beam Universal Remote Codes for GE TV

• 2433
• 0198
• 0214
• 0048
• 0004

Beam Universal Remote Codes for Goldstar TV

• 0006
• 2117
• 3107
• 1949
• 0338

Beam Universal Remote Codes for Haier TV

• 2502
• 0217
• 0077
• 3001
• 0216

Beam Universal Remote Codes for Hisense TV

• 3537
• 1173
• 0182
• 2060
• 2463

Beam Universal Remote Codes for Hitachi TV

• 0088
• 0419
• 0012
• 0061
• 0091

Beam Universal Remote Codes for ILO TV

• 2451
• 0189
• 2012
• 2141
• 1024

Beam Universal Remote Codes for Insignia TV

• 13031
• 0135
• 0133
• 0199
• 1160

Beam Universal Remote Codes for JBL TV

• 0062

Beam Universal Remote Codes for Jensense TV

• 0133
• 0004
• 0009
• 4086

Beam Universal Remote Codes for JVC TV

• 2446
• 0160
• 0065
• 0026
• 0067

Beam Universal Remote Codes for LG TV

• 3534
• 0004
• 2098
• 0155
• 2254

Beam Universal Remote Codes for Magnavox TV

• 2477
• 0899
• 1174
• 1130
• 1133

Beam Universal Remote Codes for Mitsubishi TV

• 2086
• 0151
• 0005
• 0004

Beam Universal Remote Codes for Memorex TV

• 0051
• 0004
• 2103
• 0009
• 2228

Beam Universal Remote Codes for NEC TV

• 0004
• 005
• 0009
• 0010
• 1142

Beam Universal Remote Codes for Olevia TV

• 2347
• 1012
• 1156
• 2459
• 1142

Beam Universal Remote Codes for ONN-ROKU TV

• 3552
• 3544
• 3545
• 3543
• 2357

Beam Universal Remote Codes for Panasonic TV

• 3005
• 2484
• 0381
• 24770
• 3024

Beam Universal Remote Codes for Philips TV

• 3535
• 1154
• 2477
• 2495
• 1141

Beam Universal Remote Codes for Philco TV

• 0183
• 0198
• 0004
• 0075
• 0008

Beam Universal Remote Codes for Pioneer TV

• 0185
• 0009
• 0072
• 0004
• 1879

Beam Universal Remote Codes for Polaroid TV

• 2099
• 1025
• 0214
• 2466
• 2063

Beam Universal Remote Codes for Proscan TV

• 2467
• 2480
• 1174
• 0000
• 1173

Beam Universal Remote Codes for Quasar TV

• 0170
• 1820
• 2057
• 0070
• 3024

Beam Universal Remote Codes for RadioShack TV

• 0004
• 0095
• 1949
• 0048

Beam Universal Remote Codes for RCA TV

• 0048
• 3027
• 2433
• 0004
• 2357

Beam Universal Remote Codes for Realistic TV

• 0004
• 0095
• 1949
• 0048
• 2357

Beam Universal Remote Codes for Samsung TV

• 3528
• 2481
• 2482
• 2355
• 0007

Beam Universal Remote Codes for Sansui TV

• 2466
• 2103
• 0189
• 1181
• 2456

Beam Universal Remote Codes for Sanyo TV

• 0110
• 2458
• 1181
• 2457
• 0012

Beam Universal Remote Codes for Sharp TV

• 2464
• 2491
• 0223
• 2352
• 2489

Beam Universal Remote Codes for Sony TV

• 3536
• 2483
• 2462
• 2438
• 0002
• 0382
• 2938

Beam Universal Remote Codes for Soundesign TV

• 0004
• 0008
• 0009
• 0051
• 0042
• 2384
• 2834

Beam Universal Remote Codes for Sylvania TV

• 0187
• 2324
• 0135
• 2426
• 2364
• 2834

Beam Universal Remote Codes for TCL-ROKU TV

• 3532
• 2492
• 2479
• 3004

Beam Universal Remote Codes for Toshiba TV

• 0109
• 2479
• 0159
• 2103
• 0095

Beam Universal Remote Codes for Vizio TV

• 3533
• 2472
• 2045
• 2501
• 2473

Beam Universal Remote Codes for Westinghouse TV

• 2480
• 3098
• 3099
• 0013
• 2062
• 2060
• 2061

Beam Universal Remote Codes for Yamaha TV

• 0004
• 0005
• 0009
• 3024
• 0172
• 0283

Beam Universal Remote Codes for Zenith TV

• 2492
• 2459
• 033
• 0381
• 0003
• 2384
• 2034
• 2119

Steps on How to Program Your Beam Universal Remote

For TV Direct Programming

Follow the steps below:

1. Find the Right Code for Your TV Brand:

• Start by locating the specific code for your TV brand. Refer to the list of Beam universal remote codes above and find the one that corresponds to your TV brand.

• Copy the 4-digit code or write it down, as you will need to enter it into the remote.

2. Initiate Programming Mode:

• Hold your Beam remote control close to your TV.

• Look for the ‘Program’ button on your remote and press and hold it.

• Keep holding until a small LED light on the remote lights up, indicating that the remote is ready to be programmed.

3. Select the TV Component:

• After the LED lights up, release the ‘Program’ button.

• Now, press the ‘TV’ button on your remote. This is the component button that tells your remote which device you are programming.

• The LED light will blink once, confirming that your remote is now in programming mode.

4. Enter the TV Brand Code:

• With the remote in programming mode, use the number buttons on the remote to enter the 4-digit code you noted earlier for your TV brand.

• If you enter the correct code, the LED light will stop blinking. This indicates that the code has been accepted.

5. Test the Remote:

• To confirm that the programming was successful, press the ‘Power’ button on your Beam remote.

• If your TV responds (turns off or on), congratulations! You’ve successfully programmed your Beam remote to your TV.

• If the TV doesn’t respond, double-check the code you entered and repeat the process. Sometimes it may take a couple of attempts to get the right code.

And there you have it! Your Beam universal remote control should now be programmed to operate your TV.

If you encounter any difficulties, make sure to review the steps.

For Programming to Another Remote/Mirroring

This method is for syncing your Beam remote with another IR (InfraRed) remote – otherwise called mirroring.

Follow the following steps:

1. Start the Programming Mode:

• Find the ‘Program’ button on your Beam remote.

• Press and hold this button. Keep holding until you see a small LED light turn on. This light is usually located near the top of the remote.

2. Select the Device to Program:

• Next, press the button on your Beam remote that corresponds to the device you want to program. For programming a TV, press the ‘TV’ button.

• Notice that the tiny LED light will blink once, indicating that the remote is ready for programming.

3. Activate Pairing Mode:

• Now, it’s time to enter the remote into pairing mode. Do this by pressing the number buttons on your Beam remote to enter the code ‘8-8-8-8’.

• This sequence tells your Beam remote that you’re about to start mirroring another remote.

4. Align the Remotes:

• Take the original remote control for your TV (or whatever device you’re programming) and your Beam remote and hold them facing each other.

• The top ends (where the IR sensors are located) should be about 1 inch apart. This close distance is crucial for the remotes to communicate effectively.

5. Mirror the Buttons:

• On your Beam remote, press the button you wish to program. For instance, if you want to program the ‘Volume Up‘ function, press the ‘Volume Up‘ button on the Beam remote.

• Hold this button for a few seconds until you hear a beep sound. This beep means the Beam remote is ready to receive the signal from the original remote.

6. Transfer the Command from the Original Remote:

• Now, press and hold the same button on the original remote – in the example above, the ‘Volume Up‘ button.

• Keep it pressed until you hear another beep from the Beam remote, confirming that the command has been copied.

7. Save Your Settings:

• Repeat the above steps for any other buttons you wish to mirror.

• Once you are done programming all the desired buttons, press the ‘Program’ button on your Beam remote again to exit the programming mode and save your settings.

And that’s it! Your Beam remote should now be able to perform the functions of your original remote.

Remember, this method works with IR (infrared) remotes and is incompatible with RF (radio frequency) or Bluetooth remotes.

If you run into any issues, review each step to ensure everything was done correctly

Limitations in Beam Remote Control Programming

When you program your Beam universal remote to work like another remote (like mirroring the functions of your TV remote), there are some limitations.

Not every button on your Beam remote can copy the functions of buttons on the other remote.

Specifically, buttons like ‘Program,’ ‘Component,’ ‘FAV,’ ‘Custom,’ and ‘Activity‘ buttons on the Beam remote can’t be set to mimic or copy any buttons from your original remote.

In other words, while you can program the Beam remote to do most things that your TV remote does (like changing channels or adjusting the volume), you can’t program it to take over specialized functions assigned to these specific buttons on the Beam remote.

These buttons are designed for specific tasks on the Beam remote and can’t change their function to match the buttons on your original remote.

Before You Go…

We’ve written a guide on how to program the Monster Universal Remote. We also have a list of codes for different TV brands. Read the guide next…

Monster Universal Remote Codes: Programming Monster Remote Guide